10 Best car amplifier (2025)

• DIMENSIONS: 10.43" x 9.21" x 2.25", WEIGHT: 4.37 lbs
• SPECS: Monoblock, Class A/B, 2Ω Stable, MOSFET Power Supply, 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms
• SPECS CONT'D: Low Pass Filter, Bass Boost, Input Sensitivity, Illuminated Logo, Thermal, Short and Overload Protection Circuits, Remote Subwoofer Control
• INPUTS/OUTPUTS: RCA & Speaker Level Inputs
• WARRANTY: BOSS Audio Systems provides a powerful 6-year platinum online dealer warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality

This Skar Audio RP-1200.1D Monoblock Class D MOSFET Amplifier with Remote Subwoofer Level Control, 1200W is a top choice in . Customers appreciate its quality, performance, and value.

• 4-Channel Amplifier
• 55 watts RMS x 4 at 4 ohms
• 80 watts RMS x 4 at 2 ohms
• 160 watts RMS x 2 bridged output at 4 ohms (4-ohm stable in bridged mode) CTA-2006 compliant
• Variable high- and low-pass filters (50-400 Hz, 12 dB/octave)

• 2 channels x 1,000 watts @ 2 ohms
• 2 channels x 500 watts @ 4 ohms
• 1 channel x 2,000 watts (mono bridged) @ 4 ohms
• Operates in stereo, bridged mono, or stereo/bridged mono simultaneously
• Variable electronic crossover: 12 dB per octave

• 3,000 watts x 1 channel max power output
• 198 watts RMS x 1 channel at 4 ohms
• 396 watts RMS x 1 channel at 2 ohms
• Designed to power vehicle subwoofer
• slim to fit in any trunk

• Power - 2000 Watts MAX x 1 @1-Ohm, 1000 Watts RMS x 1 @1-Ohm, 650 Watts RMS x 1 @2-Ohms,400 Watts RMS x 1 @4-Ohms
• Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
• 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
• To keep both your car and the stereo amp safe, this ZE1000.1 is equipped w/ thermal, overload and short circuit protection. Has been specially designed from the bottom up to provide safe and high quality sound in a sturdy form factor
• Specs - Dimensions: 11” x 6.9” x2”, Weight 6.6 lbs.

• Power - 100 Watts Max X 4 @2-Ohms, 50 Watts Max X 4 @4-Ohms
• Class A/B Topology - Class ‘A’ Amplifiers Have Enormous Amount Of Current Flowing Through Its Output Transistors With No Audio Signal. Class ‘B’ Amplifiers Have No Current Flowing Through Its Outputs With No Audio Signal
• Full Range - With A Full Range Amplifier You Not Only Have The Option To Run Your Speakers, But Also Your Subwoofers
• Specs - Dimensions: 7.8” x 9” x 2”, Weight: 3.09 lbs., Speaker Impedance: 2 to 8 Ohm, THD @ RMS Output: 0.01%, S/N Ratio: 90 dB, Frequency Response: 12 Hz to 22 kHz, Fuse Quantity: 1 15 Amp ATO Blade
• BOSS Audio Systems provides a powerful 6-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality

• 2-Channel Class A/B Amp – Elevate your car audio with the Pioneer GM-A3702 2-channel amp, delivering louder and clearer sound. Unleash increased power, transforming your listening experience beyond the limitations of a traditional radio.
• Maximum Power Output – Power up your music. The GM-A3702 cranks out a strong 500 watts of max power output creating dynamic and impactful sound reproduction, with 60 watts RMS x 2 at 2 ohms (190 watts RMS x 1 in bridged mode).
• Efficiency – The Pioneer GM-A3702 boasts a Class AB design, balancing efficiency and performance, ensuring optimal power usage for a reliable audio experience without excessive heat generation.
• Low Distortion – With minimized crossover distortion, this amplifier guarantees a clean and distortion-free audio output, preserving the integrity of the source signal for high-quality sound reproduction.
• Selectable Low-Pass Filter – Featuring a selectable low-pass filter with precision control, the GM-A3702 allows users to tailor their audio experience with a cutoff frequency of 80 Hz and a gradual 12 dB per octave slope for optimal customization of bass frequencies.

• 2 Ohm Stable Operation & Soft Turn On Circuit
• Thermal and Speaker Short Protection Circuitry
• Heavy-Duty Aluminum Alloy Heatsink | Class A-B Operation
• Remote Turn-On / Turn-Off Circuit
• LED Power and Protection Indicators

• 1500W Maximum Power Full-Range Amplifier
• Optimized 150-watt RMS output and a max power output of 1500 watts, you can give your music a huge boost in power that will have you and your passengers partying while on the road
• This slim amplifier fits perfectly into any trunk so you can easily connect it to your stereo system