Oscilloscope technology continues to evolve, and the 10 best oscilloscopes of 2025 are set to redefine precision and functionality in electronic testing. These advanced instruments offer enhanced bandwidth, improved sampling rates, and user-friendly interfaces, making them ideal for both professionals and hobbyists. With features like deep memory, advanced triggering options, and connectivity capabilities, these oscilloscopes cater to a wide range of applications, from basic troubleshooting to complex signal analysis. Whether you're in a lab or working on a DIY project, investing in one of these top-rated oscilloscopes will elevate your measurement capabilities.
SALE
−$10.17
FNIRSI DSO152 Oscilloscope - 2.8" TFT Handheld Digital Oscilloscope Kit Portable Oscilloscope, 2.5MS/s High Sampling Rate, 200KHz Bandwidth, Trigger Function Auto/Nomal/Single
- 【Faster sampling speed】FNIRSI DSO152 mini oscilloscope has a real-time sampling rate of 2.5 MS/s and a 200 KHz bandwidth. The 10 x probe can measure up to 800 VPP, which is equivalent to 280 V AC. Voltages up to 400 V can be measured
- 【Professional Designed 】Features with full trigger function (AUTO/Normal/Single). Works perfectly for both periodic analog signals and aperiodic digital signals. 2.8 inch HD LCD display screen, a resolution of 320*240, clear and easy to observe
- 【Portable Mini Oscilloscope】Pocket oscilloscope is an Assembled finished Machine, lightweight and easy to carry, it can be used directly to avoid assembling welding process problems. Applicable to the maintenance industry and R&D education industry
- 【Easy Measuring】Equipped with efficient one-key AUTO setting of all parameters, the measured waveform can be displayed without cumbersome adjustment. Long press the AUTO button to quickly calibrate the baseline,fast measurement of waveforms
- 【Longer Battery Life】DSO152 scilloscope has a built-in 1000 mAh high-quality lithium battery, which can be used continuously for about 4 hours after being fully charged. Type-C interface supports data transmission and charging, firmware upgrade
$31.44
Siglent Technologies SDS1202X-E 200 mhz Digital Oscilloscope 2 Channels, Grey
- Country of origin : China
- Real-time sampling rate up to 1 gsa/use
- IRecord length up to 14 Mpts
- Standard serial bus triggering and decode, supports iic, spi, uart, Rs232, can, and lin
- (Playback Language)
$379.00
FNIRSI 1013D Plus Oscilloscope - Portable Handheld Tablet Oscilloscope with 100X High Voltage Probe, 2 Channels 100Mhz Bandwidth 1GSa/s Sampling Rate 7" TFT LCD Touch Screen
- Professional Designed: FNIRSI oscilloscope with 1 GSA/S sampling rate and 100 MHZ * 2 bandwidth. Fnirsi oscilloscope has a complete trigger function (single/normal/automatic), it can be used for both periodic analog signals and aperiodic digital signals
- Highly Performance: 7 inch, 800 * 480 resolution, bright colors, high contrast. Ultra-thin and easy to carry. Built-in high-voltage protection module, can tolerate a continuous voltage of up to 400 V. 6000 mAh lithium battery, sustainable use of 4 hours
- Waveform Image Manager: 1 GB storage space can store up to 1000 screenshots 1000 sets of waveform data. Waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning and waveform zooming in, zooming out, moving, etc
- Easily Measuring : Capacitive screen touch & gesture operation, cursor measurement, when manually reading amplitude-frequency parameters, and you can directly get the peak-to-peak value and frequency without reading the background scale unit and quantity
- Lissajous Graphic Display & FFT Viewing: Lissajous graphic display function can be used to compare the amplitude, frequency and phase of the two sets of signals. FFT viewing function can roughly estimation of the harmonic content of the signal
$152.99
SALE
−$15.00
FNIRSI 2C53T Upgraded Handheld Oscilloscope, 50MHz Bandwidth, 3IN1 Digital Oscilloscope Multimeter DDS Generator, 250MS/s Sampling Rate, 19999 Counts, Voltage, Current, Capacitor, Resistor, Diode Test
- 【Newly Version】The 2C53T is an upgraded version of the 2C23T, which improves the measuring range and adds math operation，cursor measurement，persistence mode，XY mode features
- 【2 Channel Oscilloscope】50 MHz bandwidth, 250 MSa/s sampling rate, 1 Kpts record depth, automatic measurement function, max voltage 400 V, vertical sensitivity 10mV/div-10V/div , support waveform image storage and export
- 【4.5-Digit 19999 Counts Multimeter】AC Voltage: 0-750 V, DC Voltage: 0-999.9 V, DC/AC Current: 0-9.999 A, Resistance: 0-19.99 MΩ, Capacitance: 0-99.99 mF, Continuity Measurement. Multi-function meter for professionals, schools and hobbyists
- 【Signal Generator】The maximum waveform output frequency can reach 50 kHz and a step of 1 Hz, and can output 13 waveforms
- 【Save function】one-click save, screening function. You can upload the saved image by connecting to PC via Type-C. You can easily compare the waveforms by displaying the reference waveform and the measured waveform on the same screen
$84.99
SALE
−$4.87
【Upgraded Model 2*P6100 Probe】 FNIRSI 3 in1 Oscilloscope/Multimeter/DDS Signal Generator with 2 Channels, 10MHz Bandwidth, 50MSa/s Sampling Rate, 10000 Counts, Voltage, Current, Capacitor, Resistor
- 【3 in 1】The FNIRSI-2C23T has combined the functions of 2 channels oscilloscope, digital multimeter and signal generator. Handheld and easy to carry. An ideal multi-functional instrument for professionals, factories, schools, enthusiasts, or families
- 【Oscilloscope Mode】2 channel, 10MHz bandwidth, real-time sampling rate 50MSa/s, record depth 32kb, measurement voltage ±400V, automatic measurement, trigger function auto/normal/single, 200mv/div-10v/div vertical sensitivity, waveform storage and export
- 【Multimeter Mode】4-digit 10000 Counts. AC Voltage: 0-750V, DC Voltage: 0-999.9V, DC/AC Current: 0-9.999A, Resistance: 0-99.99MΩ, Capacitance: 0-99.99mF, Temperature: -55°C-1300°C/-67~2372℉, Diode, Continuity Measurement
- 【Signal Generator Mode】Waveform output frequency 2MHz and a step of 1Hz，outputs seven waveforms including sine, square, triangle, full, half, noise, and DC. The output frequency, amplitude, and duty cycle are adjustable
- 【Large Capacity Battery】 FPGA+MCU+ADC hardware architecture, built-in high-voltage protection module, 2.8-inch 320*240 resolution HD LCD display, built-in rechargeable battery 3000mAH, standby time 6H, Type-C , 5V/1A power adapter charging
$84.99
SALE
−$20.30
Hantek DSO2C10 Digital Storage Oscilloscope 100MHz Bandwidth 2CH Dual Channel 1GSa/s 8M Memory Depth with High Voltage Probre
- Cost-effective economy oscilloscope.
- Support arbitrary waveform output, 14 kinds of trigger modes, standard with 5 kinds of serial protocol triggers and decodes.
- Useful commissioning instrument for various fields such as communication, aerospace, national defense, embedded systems, computers, research and education.
- Package weight of the Product: 5.95 Pounds
$189.69
AUKUYEE Oscilloscope - 2.4"TFT Handheld Digital Oscilloscope Kit, Mini Portable Multimeter Oscilliscope, Audio Scope Tester, with BNC-Clip Cable Probe, Power Supply
- UPGRADED VERSION - Please Calibrate the oscope Before Use! The sensitivity of Q15001 has been extended in both directions and is higher and wider. It reaches 5mV/div - 20V/div. Also, this updated version can be handheld.
- DESIGNING TO YOUR NEEDS - Display and MCU are mounted on the same board (mainboard) to avoid using inter-board pin-headers. Analog channel is placed on a separate board that contains most user install parts, so the analog and digital circuits can be better separated.
- ROTARY ENCODER - It has been added the rotary encoder, makes parameter adjustment quicker and easier.
- ASSEMBLED FINISHED - AUKUYEE Q15001 oscilloscope is an Assembled finished Machine. NOT DIY PART, it can be used directly to avoid assembling welding process problems and greatly saves the assembly time.
- WHAT YOU GET - You will get an assembled oscilloscope, BNC-clip cable and a power pupply. Detailed Operation instructions troubleshooting guide and schematic are also provided.
$35.99
Siglent Technologies SDS1104X-E 100Mhz Digital Oscilloscope 4 Channels Standard Decoder, Grey
- Package Weight :4.0 Kg
- Standard Decoder: Iic, Spi, Uart/Rs232, Can, Lin
- 16 Digital Channels (Mso) (Four Channel Series Only, Option)
- Usb Awg Module(Four Channel Series Only, Option)
$499.00
3 in 1 Handheld Oscilloscope Automotive Dual Channel 50MHz with Digital Multimeter and Signal Generator
- 【Oscilloscope】This dual-channel oscilloscope can measure pulse waves, circular waves, noise waveforms, and more. When dealing with unknown waveforms, the AUTO automatic recognition function can be used. This powerful auxiliary feature varies in recognition time depending on the size and complexity of the waveform, enhancing measurement efficiency
- 【Multimeter】In multimeter mode features 25000 counts and can measure resistance, capacitance, continuity, diodes, and current. Its multifunctional design makes it an ideal tool for electronic measurements, offering high precision and a wide range of applications
- 【High Speed Mode】The ZT-703S oscilloscope offers two operating modes, which can be switched on the fourth page of the menu. In normal mode, it features a sampling rate of 200MSa/s and a maximum measurement bandwidth of 30MHz, consuming less power and being more energy-efficient. In high-speed mode, it has a sampling rate of 280MSa/s and a maximum bandwidth of 50MHz, with higher power consumption. The storage depth is 128K, catering to different usage needs
- 【Signal Generator Mode】In the expanded application mode, the Oscilloscope can store waveform images and activate the signal generator function. It can output sine waves, square waves, triangle waves, and more, with synchronous display in the demonstration window for easy observation and comparison, greatly expanding the device's application range
- 【Charging & Data Transfer】This product uses a Type-C charging port for both charging and data transfer. The Type-C interface supports fast charging and efficient data transfer, making the device more convenient and efficient to use. Due to the multiple functions of this product, please read the user manual before use, and refer to the manual for troubleshooting during use
$89.99
FNIRSI DSO-510 Handheld Oscilloscope/DDS Signal Generator 2 in 1, Digital Portable Automotive Oscilloscope 2.8 inch TFT, 10MHz Bandwidth, 48MS/s Sampling Rate, Trigger Function Auto/Nomal/Single
- 【Upgraded DSO152】FNIRSI DSO-510 handheld oscilloscope is upgraded from FNIRSI DSO152 oscilloscope, 10 MHz high bandwidth, 48 MS/s high sampling rate, 50 ns-20 S time base range. Voltages up to 400 V can be measured
- 【Accurate measurement】The digital portable oscilloscope supports the level of display and the infinite afterglow, which can accurately capture the signal features. It supports waveform scaling, suspension, movement and image saving and exporting functions
- 【DDS signal generator】FNIRSI DSO-510 can output 13 kinds of waveforms, and the maximum waveform output frequency is up to 50 KHz, which can meet the needs of diversified signal simulation and improve the efficiency of testing and analysis
- 【Professional Designed】Suitable for periodic analog signals and non-periodic digital signals. 2.8-inch HD LCD display, 320*240 resolution, which is clear and easy to observe. The one-key AUTO function can automatically optimize the measurement parameters
- 【Long-lasting battery life】The automotive oscilloscope has a built-in 1000mAh high-quality lithium battery and supports Type-C interface charging to ensure worry-free long-term use
$37.94
Last update on 2025-05-23 / Affiliate links / Images from Amazon Product Advertising API