10 Best home subwoofer (2025)

• 10" front-firing spun-copper IMG woofer
• All-digital amplifier with 300 watts peak power
• Volume low pass crossover and phase control
• Line level LFE RCA inputs for maximum receiver compatibility
• Dimensions 14 5" x 12 5" x 16 4"

• 12" high excursion spun-copper Imp woofer
• 29 hertz – 120 hertz plus /- 3 dB
• 400 watt
• Max acoustic output 116dB
• Bass-reflex via rear firing port. Amplifier power (control/peak): 200 watts/400 watts

• Powerful 12" copper-spun front-firing woofer
• All-digital amplifier delivers 400 watts of dynamic power
• Equally impressive with music and movies; Brushed black polymer veneer cabinet with satin painted plinth
• Low pass crossover and phase control
• Line/LFE inputs for compatibility with most receivers

• This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers.Waterproof : No
• The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output.
• High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier.
• Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer will then combine the signals to process the mono bass signal it needs to drive the speaker. If you are using an amplifier with a single mono subwoofer line level output, simply use an RCA "Y" cable to split the output and send it to the two line level inputs on the subwoofer.
• The subwoofer is housed in an attractive black wood cabinet that measures 13.75" x 11.75" x 11.75" (H x W x D). The driver and a 2 3/4" sound port are located on the front, covered by a black cloth speaker grill.

• New twisted flare port contributes to clear and tight bass
• Advanced YST II (Yamaha Active Servo Technology II)
• 10” cone woofer
• Stylish addition to any room

This Rockville Rock Shaker 10 Black, 10" Powered Subwoofer, 600W, Deep Bass, Class-D Amp, RCA Inputs, Perfect for Home Theater & Studio is a top choice in . Customers appreciate its quality, performance, and value.

This Polk Audio PSW10 10" Powered Subwoofer – Power Port Technology, Up to 100 Watts, Big Bass in Compact Design, Easy Setup with Home Theater Systems, Timbre-Matched with Monitor & T-Series Polk Speakers is a top choice in . Customers appreciate its quality, performance, and value.

• Spun copper front-firing Cerametallic woofers
• 10-inch, front-firing driver
• 150 watts continuous, 300 watts dynamic power
• Strong, flexible, removable grille
• All digital amplifier for high-efficiency and true-to-source sound accuracy

• New twisted flare port contributes to clear and tight bass
• Advanced YST II (Yamaha Active Servo Technology II)
• 8” cone woofer
• Stylish addition to any room
• Dynamic Power: 100W (5 ohms)

This Rockville Rock Shaker 6.5 Black, 6.5" Powered Subwoofer, 250W, Deep Bass, Class-D Amp, RCA Inputs, Perfect for Home Theater & Studio is a top choice in . Customers appreciate its quality, performance, and value.