Cheap plasma cutter options are becoming increasingly popular among DIY enthusiasts and professionals alike, thanks to their affordability and efficiency. In 2025, the market offers a variety of budget-friendly plasma cutters that deliver impressive performance without breaking the bank. These tools are designed to cut through metal with precision, making them ideal for various projects, from automotive repairs to metal art. With advancements in technology, even the most economical models now feature enhanced features such as portability, ease of use, and reliable cutting capabilities. Whether you're a hobbyist or a seasoned welder, finding the right cheap plasma cutter can significantly enhance your workflow and creativity.
Plasma Cutter,55Amp 110/220V Non-Touch ARC Digital Screen Display DC Inverter Plasma Cutting Machine
- The current display shows 20-55A at 110V and 20-55A at 220V. The recommended maximum cutting thickness is 15mm at 35A with 110V and 50 PSI, and 20mm at 55A with 220V and 60 PSI.
- This plasma cutter machine efficiently cuts through rough, painted, and rusty surfaces, reduces energy consumption during non-cutting tasks, minimizes electrode burning, and extends service life. It is suitable for stainless steel, alloy steel, mild steel, copper, aluminum, and more.
- Inside the machine, there is an air pressure sensor that allows users to adjust the air pressure via the regulator. Users can also connect to an oxygen supply after linking to the air compressor.
- Included with the machine are the power supply, plasma torch, ground clamp, pre-installed NPT 1/4” industry-type D plug, air filter regulator, consumables, and an instruction manual. The setup is easy, and lifetime technical support is provided,plasma cutter without a built-in air compressor.
$149.99
Reboot Plasma Cutter, 50Amps Plasma Cutter Machine with 120V 240V Dual Voltage, Digital IGBT Inverter Power Plasma cutters 1/2 Inch Clean Cut New Upgrade
- 50A TOUCH ARC PLASMA CUTTER: RBC5000D is a high frequency touch arc starting mode; Torch head need to touch the metal plate
- AIR COMPRESSOR REQUIRED: 90 PSI, 60L/min; Consumables model: PT31; Suitable for cutting stainless steel, cast iron, steel, copper, titanium, and other metal materials
- CUTTING THICKNESS: With advanced IGBT inverter technology, the maximum severance cut can reach up to 3/5" (15 mm), 1/3" (9 mm) clean cut at 50A 240V; 50% duty cycle
- PORTABLE and LIGHTWEIGHT: machine weighs only 8.2 pounds, portable in the shop or at the job site; It allows the end user to easily move from location to location
- RICH PACKAGE LIST: Extra 7 pcs elctrodes, 7 pcs nozzles; 9.9 ft cable PT31 torch; 6.6 ft cable ground clamp; 120 to 240v conversion line; Air hose; 2 air couplings; Air pressure filter/regulator, etc.
Deprecated: preg_replace(): Passing null to parameter #3 ($subject) of type array|string is deprecated in /home/runcloud/webapps/joesitalianfulshear/wp-content/themes/blocksy/aawp/products/custom-table.php on line 139
SALE
−$24.00
FLARING Plasma Cutter,65 Amp Plasma Cutter Machine 120V 240V 4/5" (20mm) Max Cutting 1/2" (12.7mm) Clean Cut IGBT High Frequency Inverter Touch ARC Plasma Cutter with Consumable Set Update 5th FC650D
- 【5GEN HIGH EFFICIENCY CUTTING】With advanced IGBT inverter technology, the maximum severance cut can reach up to 4/5" (20mm), 1/2" (12.7mm) ideal clean cut, 60% duty cycle.BREAKER: 50A for 120V, 30A for 240V; Consumable model: PT31
- 【AUTOMATIC DUAL-VOLTAGE 120/240V】Allows the machine to run directly on 240V 50/60 Hz power or on 120V 50/60 Hz with the use of a power adapter, without removing the covers to relink the power source. Suitable home DIY and industrial projects
- 【EASY TO CUT】Fit for cutting aluminum, magnesium alloys, brass, stainless steel, cast iron, steel, copper, copper, titanium, and other metal materials.Plasma cutters is very friendly to both DIY, beginner cutter, and professional workers
- 【PORTABLE AND LIGHTWEIGHT】Portable in the shop or at the job site, this flaring 120V/240V 65 Amp touch plasma cutter machine only weighs 8.4 pounds, easy to carry. Package weighs 14 pounds. It allows the end user to easily move from location to location
- 【STABLE DURABLE】Provides maximum customer convenience by automatically controlling the arc when cutting expanded metal or multiple pieces of metal,all automatically No manual re-triggering is required, reducing user hand fatigue
$135.99
ARCCAPTAIN iControl Cut55 Pro Plasma Cutter, [APP Control] 55 Amp Non-Touch Pilot Arc 120V/240V Plasma Cutter Machine, Large LED Display and 2T/4T, 3/4 inch Maximum Cut, DC Inverter IGBT
![ARCCAPTAIN iControl Cut55 Pro Plasma Cutter, [APP Control] 55 Amp Non-Touch Pilot Arc 120V/240V Plasma Cutter Machine, Large LED Display and 2T/4T, 3/4 inch Maximum Cut, DC Inverter IGBT -](https://m.media-amazon.com/images/I/51naxqQVKfL.jpg)
- CUTTING THICKNESS UP TO 20MM: Featuring a brand-new MCU technology upgrade, the plasma cutter machine has a high degree of internal integration, combining full digitalization for more precise control of cutting parameters such as current and voltage. This results in better cutting effects and improved stability. Cutting thickness: Quality 12mm (1/2"), maximum 20mm (3/4").
- PILOT ARC FUNCTION: The CUT55 Pro plasma cutters features a high frequency non-touch arc starting mode. Arc initiation without contact allows for cutting steel surfaces with dirt, rust, or coatings without affecting cutting performance. This greatly facilitates user operation and, since it avoids contact with the workpiece, helps to prevent torch damage and extend its lifespan.
- APP CONTROL: Enables easy interaction with the plasma cutter welder combo via APP. Allows parameter adjustments, real-time monitoring, and status detection from up to 50 meters away. Users can choose cutting processes, save settings, and access FAQs, making it ideal for beginners and for ongoing maintenance.
- 2T/4T & INTELLIGENT POST-BLOW: 2T mode is suitable for flexible cutting, while 4T mode helps alleviate fatigue from prolonged operation. Cutting current 20-34A, post-blow time 5s; Cutting current 35-45A, post-blow time 8s; Cutting current 46-55A, post-blow time 10s. No manual adjustment of post-blow time is required, making it more convenient.
- ONE MIN START CUTTING: Equipped with a pre-installed air regulator & filter for quick installation in 1 minute. It includes a high-quality filter pressure regulator that allows for rapid adjustment of air pressure, while filtering out water, oil, and impurities from the gas to ensure clean air and stable pressure.
$369.99
FLARING Plasma Cutter,65Amp Non-Touch Pilot Arc Plasma Cutter Machine 120V/240V Dual Voltage Plasma Cutters,1/2"(12.7mm) Clean Cut 4/5"(20mm) Severance Cut with Consumable Set Update 5th FC650DL
- 65A NON-TOUCH PILOT ARC PLASMA CUTTER 5GEN：Effortlessly cuts through rough, painted. The pilot arc technology enables cutting without direct contact between the tip and the metal, resulting in improved cutting quality and extended consumable lifespan
- EASY TO CUT：With advanced IGBT inverter technology, 10-60A DC output, 1/2” ideal clean cut and 4/5” maximum severance cut under 220/240V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc
- VOLTAGE TRANSFER：A conversion cord is included to easily convert 110V to 220V or 120V to 240V for use in your home, shop, or factory. 30A circuit breakers are recommended for 240V and 60A circuit breakers are recommended for 120V
- PORTABLE AND EASY TO USE：This plasma cutter 65 amp pilot arc equipment only weighs 8.4 pounds, easy to carry. The pre-installed quick air coupling, only takes 30 seconds and you can start cutting. Significantly save your preparation time
- PACKAGE INCLUDES：FLARING 65 amps plasma cutter machine FC650DL 5GEN, with upgrade plasma cutting torch AG60, ground clamp, air filter regulator, air hose, consumables, instruction manual etc
$149.99
YESWELDER CUT-50DS Plasma Cutter, 50Amp Air Power Large Digital Display 110/220V Dual Voltage IGBT Inverter Plasma Cutting Machine
- POWERFUL CUTTING ABILITY: 20-50A output,Ideal Clean Cut: 1/4''(6mm) @110V, 1/2"(12mm) @220V, Maximum Cut: 3/8''(10mm)@ 110V, 5/8''(16mm) @ 220V. Uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
- DIGITAL DISPLAY: The latest digital display screen centrally displays parameters such as air pressure, voltage, current, etc., allowing users to view the status of the equipment in real time, adjusting the operation in a timely manner, and improving the efficiency of the operation. There will be an error code system on the screen if there is a problem with the machine.
- BUILT-IN POST FLOW: When you stop cutting, the air runs on to cool the consumable of the plasma cutter torch. This will extend consumable life.
- AIR FILTER REGULATOR: The air filter is mounted at the rear of the machine, which allows for quick connection and saves installation time and improves efficiency.
- LIGHTWEIGHT AND PORTABLE: Allows for connection to 110 or 220 volt receptacles without tools, Portable in the shop or at the job site—at 11.46lb, allows the user to easily move from location to location.
$229.99
SSIMDER Plasma Cutter 50Amp Plasma Cutter Machine with Dual Voltage 110V/220V Non-Pilot Arc 1/2 Inch Clean Cut Plasma Cutting Equipment with High Frequency Easy Metal Cutter LCD Display IGBT Inverter
- ★【Powerful Cutting Ability】The CUT 50 Plasma Cutter machine can achieve an ideal clean cut of 1/2" (10mm) and a maximum severance cut of up to 3/4" (20mm). This Plasma Cutter machine's effectiveness in cutting through rough, painted, and rusted surfaces are pretty good, improving work efficiency, and its suitability for various materials.
- ★【Easy to Operate Plasma Cutter 】SSIMDER CUT50 Plasma Cutter has the convenience of dual voltage control for seamless switching between 110V and 220V. Plasma Cutting equipment is ease of use without the need for maintaining a specific arc distance, allowing users to control cutting quality and speed by adjusting the cutting depth and speed.
- ★ 【IGBT technical】The Plasma Cutting Equipment has overvoltage, overcurrent as well as overheat protection and uses advanced IGBT technology to cut all metals, making the Plasma Cutter machine more stable and safer. It also has automatic cooling fans and vents to effectively discharge the heat generated, which can better protect the machine and extend the service life of the cutter.
- ★【Safety Guarantee】SSIMDER CUT 50 portable Plasma Cutter's large LED design provides you with accurate data display, helping you to read all data more easily and clearly without taking off your helmet. Energy saving and noiseless operation, as well as its dual voltage function and sturdy handle make the Plasma Cutter portable and suitable for outdoor working environment.
- ★ 【Professional Plasma Cutter Machine】SSIMDER is a professional manufacturer of Plasma Cutter Machine providing high-quality Plasma Cutter Consumables and Plasma Cutter Accessories for a long time. We aim to provide a better Plasma Cutter Machine and make Plasma Cutting easier. If you have any questions, feel free to contact us
$179.99
bestarc 55Amps Plasma Cutter, Non Touch Pilot Arc, Large Digital Display Screen, CUT55P 110/220V Dual Voltage, IGBT Inverter Plasma Cutting Machine (CUT55P 110/220V)
- [Pilot Arc Function]: CUT55P plasma cutter has the pilot arc function. It is a high frequency non-touch arc starting mode. The torch head does not need to touch the metal plate. Added PA adjustable function, extended pilot arc maintenance time, reduce energy consumption in non-cutting work, reduce electrode burning, and extend service life
- [Cutting Thickness]: Plasma Cutter is dual voltage 110/220V, 50% duty cycle, 50/60Hz High frequency, Current range at 110V: 20-35A, Current range at 220V: 20-55A. The maximum cutting thickness is recommended to be 5/8''(16mm)@55A 220V 70 PSI; while ideal clean cut at 3/8''(10mm) @35A 110V 50PSI. Suitable for alloy steel, stainless steel, mild steel, copper, aluminum, etc
- [Digital Screen Display]: The screen centrally display parameters such as air pressure, voltage, and current, allowing users to understand the equipment status in real-time and adjust operations in a timely manner, improving operational efficiency. If plasma cutter cannot work, the screen comes with an error code system, making it easy to find out the problems
- [Air Compressor]: The user can adjust the air pressure through the regulator. The air filter is installed at the rear of the machine with a quick air connector 1/4 NPT connector which can be used after opening the box, The Cutter can be used only after connecting it to the air compressor, We suggest air pressure value for the air compressor within the range of 90PSI, 250L/min
- [PT/2T/4T/PA Function]: Post-flow cooling time ranging from 3 to 15s extends the torch head and consumables life. The 2T mode on the plasma cutter provides semi-automatic control torch trigger, while the 4T mode enables automatic trigger, free your finger. PA adjusted the time for the pilot arc
$219.99
ARCCAPTAIN Plasma Cutter, [Large LED Display] 50Amps Cutter Machine with 110/220V Dual Voltage DC Inverter IGBT 1/2 Inch Clean Cut Post Flow and 2T/4T, for Beginners DIY
![ARCCAPTAIN Plasma Cutter, [Large LED Display] 50Amps Cutter Machine with 110/220V Dual Voltage DC Inverter IGBT 1/2 Inch Clean Cut Post Flow and 2T/4T, for Beginners DIY -](https://m.media-amazon.com/images/I/41eW8WE-CQL.jpg)
- 【Powerful Cutting Aibility】Switch effortlessly between 110V/220V for home or workshop use. Achieve professional 1/2" clean cuts on steel, aluminum and copper with advanced IGBT technology. Perfect for DIY projects and heavy-duty tasks! The maximum cutting thickness is recommended to be 12mm @ 35A 110V, 50PSI; 18mm@50A 220V, 60 PSI.
- 【Smart Cutting Control】Customize post-flow cooling (5-15s) and switch between 2T/4T modes for seamless operation. Adjust the post-flow cooling time of the torch head to extend the service life of consumables. Recommend a cooling time of 4-8 seconds.
- 【LED Screen Display】Newly upgraded LED display, it centrally display parameters such as voltage, and current, makes it easier to adjust and view real-time data– no need to remove your safety helmet! If plasma cutter cannot work, the screen comes with an error code, making it easy to find out the problems.
- 【30-Second Setup】Plug-and-play design with built-in air regulator – no tools required! Compatible with standard air compressors (5.3CFM). The air pressure is best for 0.4mpa-0.6mpa, the recommended flow rate of 150L/min, that is, 5.3CFM, 57.5psi. Includes PT31 Torch for precision cutting.
- 【Ultra-Portable Design】At only 13 lbs, carry it anywhere with the included shoulder strap. Fits in tight spaces – ideal for job sites, garages, and DIY workshops. Please note: current display at 110V is 20-35A, under 220V is 20-50A.
$249.99
bestarc Plasma Cutter, [Pilot Arc] [Large LED Display] [Air Sensor Technology] 50Amps Cutter Machine 110/220V Dual Voltage IGBT Inverter 5/8 Inch Clean Cut, Post Flow 2T/4T for Home DIY, BTC500DP 9GEN
![bestarc Plasma Cutter, [Pilot Arc] [Large LED Display] [Air Sensor Technology] 50Amps Cutter Machine 110/220V Dual Voltage IGBT Inverter 5/8 Inch Clean Cut, Post Flow 2T/4T for Home DIY, BTC500DP 9GEN -](https://m.media-amazon.com/images/I/41LXMzHGW-L.jpg)
- [Pilot Arc Function]: BTC500DP 9th plasma cutter has the pilot arc function. It is a high frequency non-touch arc starting mode. The torch head does not need to touch the metal plate. Added PA adjustable function, extended pilot arc maintenance time, reduce energy consumption in non-cutting work, reduce electrode burning, and extend service life
- [Cutting Thickness]: HF pilot arc plasma cutter boasts an automatic detection feature for input voltages of both 110V and 220V, 60% duty cycle single phase. The maximum cutting thickness of bestarc 50A plasma cutter can reach up to 3/4" @50A 220V 65PSI, while ideal clean cut at 1/2" @35A 110V 50PSI. The circuit breaker specifications require a 40A unit for 110V operation and a 30A unit for 220V. This versatile plasma cutter is ideal for use on materials including stainless steel, alloy steel, mild steel, copper, aluminum, etc
- [Air Sensor Technology]: The air sensor built into the machine displays the air pressure on the front panel of the machine. Users can adjust the air pressure manually through the air regulator (air pressure cannot be automatically adjusted). An air filter is installed at the back of the machine, equipped with a quick-connect 1/4 NPT air connector, ready for use right out of the box. Once connected to an air compressor, the recommended air pressure should be within 70 PSI, with a flow rate of 250 liters per minute
- [Digital Screen Display]: The screen centrally display parameters such as air pressure, voltage, and current, allowing users to understand the equipment status in real-time and adjust operations in a timely manner, improving operational efficiency. If plasma cutter cannot work, the screen comes with an error code system, making it easy to find out the problems
- [PT/2T/4T/PA Function]: Post-flow cooling time ranging from 3 to 15s extends the torch head and consumables life. The 2T mode on the plasma cutter provides semi-automatic control torch trigger, while the 4T mode enables automatic trigger, free your finger. PA adjusted the time for the pilot arc
$259.99
Last update on 2025-05-17 / Affiliate links / Images from Amazon Product Advertising API