Bench vises are essential tools for any workshop, providing stability and support for a variety of projects. In 2025, the market offers an impressive selection of bench vises that cater to different needs, from heavy-duty models for professional use to compact options for hobbyists. The best bench vises combine durability, ease of use, and versatility, making them indispensable for woodworking, metalworking, and more. Whether you're a seasoned craftsman or a DIY enthusiast, investing in a high-quality bench vise can significantly enhance your work efficiency and precision.
SALE
−$9.00
Yost Vises LV-4 Homeowner's Vise | 4.5 Inch Jaw Width with a 3 Inch Jaw Opening Home Vise | Secure Grip with Swivel Base | Blue
- HOME VISE: Is the perfect tool for your home workshop. Made from heavy duty 30,000 PSI Gray Iron castings, 3x stronger than cast iron vises.
- TECHNICAL SPECS: Jaw Width: 4.5" x Jaw Opening: 3" x Throat Depth: 2.6" x Pipe Capacity: Min 0.6” D x Max 1.85". Mounting hardware is not included.
- SWIVEL BASE: Vise head rotates 240° and equipped with a large 3.5" x 2.7" (8.9CM X 6.9CM) anvil work surface.
- HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and/or the vise. When finished working on the item, turn screw handle counterclockwise to release the item.
- YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that are safe and easy to use. We offer lifetime tech support to back our quality guarantee.
$29.99
VEVOR Bench Vise, 6-inch Jaw Width 5.9-inch Jaw Opening, 360-Degree Swivel Locking Base Multipurpose Vise w/Anvil, Heavy Duty Ductile Iron Workbench Vise w/Bolts & Nuts, for Drilling, Pipe Cutting
- Built to Last: The swivel vise is forged from sturdy 60,000 PSI ductile iron, with a powder coating on the surface for a rust-proof finish. High-quality nuts and screws increase durability. Replaceable serrated jaw plates are made of premium carbon steel for superior grip. Go above and beyond and knock out all those tough projects!
- Large Anvil Area: The strong design comes in handier when you take the 2.9" x 3" anvil into consideration. Jaw Width: 6" / 15.2 cm. Jaw Opening: 5.9" / 15 cm. Throat Depth: 3.5"/ 8.8 cm. Creates up to 20 k.N / 4496 lbs of clamping force.
- Considerate Vise Kit: The updated accessories of this vise are now more thoughtful than ever! Comes with a set of nuts, screws, a manual, and magnetic jaw pads for hassle-free installation. No need to purchase extra fittings. They can be easily installed on your bench upon arrival. Set up and get to work!
- Adapt to Any Situation: The base can rotate an entire 360°. You can choose to tighten it in any direction you need to work at your fingertips. It allows an ever greater degree of accuracy as there is no need to keep inserting and removing the piece you are working on.
- Multifunctional Sturdy Jaw: The multi-jaw fits both flat material and pipe or tube workpiece. Pipe Clamping Diameter: 0.6"-2.9" / 1.5-7.4 cm. It is perfect for small projects and is highly adept at securing tools for sharpening, grinding, cutting, tapping, etc.
$59.94
SALE
−$7.00
VEVOR Bench Vise, 4.5-inch Jaw Width 3.3-inch Jaw Opening, 240-Degree Swivel Locking Base Multipurpose Vise w/Anvil, Heavy Duty Cast Iron Workbench Vise w/Bolts & Nuts, for Drilling, Pipe Cutting
- Built to Last: The swivel vise is forged from sturdy cast iron, with a powder coating on the surface for a rust-proof finish. High-quality nuts and screws increase durability. Replaceable serrated jaw plates are made of premium carbon steel for superior grip. Go above and beyond and knock out all those tough projects!
- Large Anvil Area: The strong design comes in handier when you take the 1.9" x 1.7"/ 4.8 x 4.3 cm anvil into consideration. Jaw Width: 4.5"/ 11.5 cm. Jaw Opening: 3.3"/ 8.5 cm. Throat Depth: 2.3"/ 5.9 cm. Creates large clamping force during your work.
- Considerate Vise Kit: The updated accessories of this vise are now more thoughtful than ever! Comes with a set of nuts, screws and a manual for hassle-free installation. No need to purchase extra fittings. They can be easily installed on your bench upon arrival. Set up and get to work!
- Adapt to Any Situation: The base can rotate an entire 240°. You can choose to tighten it in any direction you need to work at your fingertips. Allows an ever greater degree of accuracy as there is no need to keep inserting and removing the piece you are working on.
- Multifunctional Sturdy Jaw: The multi-jaw fits both flat material and pipe or tube workpiece. Pipe Clamping Diameter: 0.6"-1.8" / 1.5-4.5 cm. It is perfect for small projects and is highly adept at securing tools for sharpening, grinding, cutting, tapping, etc.
$26.99
VEVOR Bench Vise, 6.5" Jaw Width 6.5" Forward &9.3" Reverse Opening, 360-Degree Swivel Locking Base Multipurpose Workbench w/Anvil, Heavy Duty Ductile Iron w/Bolts & Nuts, for Drilling, Pipe Cutting
- Built to Last: The swivel vise is forged from sturdy 60,000 PSI ductile iron, with a powder coating on the surface for a rust-proof finish. High-quality nuts and screws increase durability. Replaceable serrated jaw plates are made of premium carbon steel for superior grip. Go above and beyond and knock out all those tough projects!
- Large Anvil Area: The strong design comes in handier when you take the 2.8" x 3" anvil into consideration. Jaw Width: 6.57" / 16.7 cm. Forward Jaw Opening: 6.5"/ 16.5 cm. Reverse Jaw Opening: 9.3"/ 23.5 cm. Throat Depth: 3.5"/ 8.8 cm. Creates up to 20 k.N / 4496 lbs of clamping force.
- Considerate Vise Kit: The updated accessories of this vise are now more thoughtful than ever! Comes with a set of nuts and screws and magnetic jaw pads for hassle-free installation. No need to purchase extra fittings. They can be easily installed on your bench upon arrival. Set up and get to work!
- Adapt to Any Situation: The base can rotate an entire 360°. You can choose to tighten it in any direction you need to work at your fingertips. Allows an ever greater degree of accuracy as there is no need to keep inserting and removing the piece you are working on.
- Multifunctional Sturdy Jaw: The multi-jaw fits both flat material and pipe or tube workpiece. Pipe Clamping Diameter: 0.6"-2.8" / 1.5-7 cm. It is perfect for small projects and is highly adept at securing tools for sharpening, grinding, cutting, tapping, etc.
$73.19
MYTEC Home Vise Clamp-On Vise，2.5"
- HOME VISE: Net weight 3.31 lbs, Maximum width of jaw opening 2.5 inch, Jaw width 2.0 inch;
- EASY TO INSTALL: This bench vise can be installed on the edge of all kinds of desktops. The table board up to 2.4 inches thick can be clamped. Convenient and quick to install and remove;
- PROTECT TABLE TOP: During installation, there is no need for punching on the table, with 2 rubber washers to prevent table scratch and 2 jaw washers for protection of the parts (To ensure good use of rubber gaskets, please refer to the product picture before use. Adjust the fixing chin to a larger opening first, then install the rubber washer in the planned corresponding position, secure it in the end);
- WIDE RANGE OF USES: This vise can hold a variety of parts，O-shape Swivel base allows vise rotating up to 360-Degree, Even if you are left-handed, you can rotate the vise to the position that suits your work;
- TIPS: Please carefully browse our product photos to understand the size of each part of the vise before place an order. We promise you that if you have any dissatisfaction with this product, you can enjoy the refund or exchange service at any time without any reason.We welcome you to contact us at any time, we will provide you with a satisfactory solution.
$22.97
Forward CR40A 4.5 Inch Bench Vise Heavy Duty Vice with Anvil and 210 Degrees Swivel Base (4 1/2")
- Jaw Width: 114.3mm (4.5"), Jaw Opening: 127mm (5"), Throat Depth: 66mm (2.6"), Clamping Force: 6600 lbs (30kN)
- Ductile Iron Bench Vise: Material upgraded, Forward CR40A vise is all made from sturdy heavy duty PSI 60,000 ductile iron, built for rugged use and extended life
- More Clamping Options: CR40A bench vice is equipped with 2 sets of jaws: replaceable serrated flat jaws with slot jaws, built in pipe jaws(φ 1/2"- 3 1/2"), secure grip and smooth slide
- More Versatile and Flexible: The 210-degree lockdown swivel base enable easy clamping of objects for your needs, making bench vice more efficient to work on complex workpiece
- Multifunctional: The 4inch vise is popular for professional choose. Large anvil work surface. Easily mounted and solid lockdown
$65.99
Wilton Reversible Bench Vise, 8" Jaw Width, 9-1/4" & 14-1/2" Jaw Opening, 4-3/4" Throat (Model 4800R)
- When in normal position, the jaw opening is 9-1/4", and 14-1/2" when reversed
- Built-in pipe jaws handle a range of pipe sizes
- Dual lockdowns and a 360° swivel base
- Replaceable hardened steel jaws with a serrated pattern ensure grip and a long life
- Two large anvil work surfaces for forming and shaping materials
$279.38
Wilton Multi-Purpose Bench Vise, 5-1/2" Jaw Width, 5" Max Jaw Opening, 2-3/4" Throat (Model 550P)
- 360-degree rotating head for clamping material at any angle
- Indexed at 30-degree increments for quick set up
- Replaceable steel pipe jaws
- Large built-in anvil for forming and shaping materials
- Replaceable hardened steel jaws with a serrated pattern ensure grip and a long life
$196.87
Nakkaa 5" Bench Vise Ductile Cast Iron Bench Vise with 360° Flexible Swivel Locking Base Heavy Duty Home Work 5 Inch Bench Vice
- Heavy Duty Casting: Made of high strength ductile iron and chrome-plated spindle and nuts, durable for long-term use and reliable to grip. The jaw adopts quenching and re-fire technology to increase its hardness and strength. Non-slip textured surface increases the grip force of jaw, which firmly holds the material, save time and effort when you work.
- Universal 5" Bench Vise: Jaw width 5.0inch/12.7cm; Maximum opening of jaw is up to 3.94inch/10cm; Throat depth 3inch/7.6cm Clamping force 15KN; This bench vise fits most workbench, and kinds of thickness of tables.
- Design: Replaceable microgroove tooth steel jaws grip workpieces without slipping, great for clamping and fixing.
- Swivel Base: Built in 360 degree swivel base, 3 mounting holes anchor vise securely to a workbench, perfect for a wide range of clamping angles. It allows an ever greater degree of accuracy while you are working with a hand tool as there is no need to keep inserting and removing the piece you are working on.
- Multipurpose: Mounting vise on the workbench, then you could do the work of woodworking, cutting conduit, drilling, gluing, metalworking, sanding or planing, sawing, etc. It can be used indoors or outdoors. Convenient and quick to install on or remove from kinds of workbench.
$41.08
Bench Vise, 6" Table Vise For Workbench,2-in-1 Multi-Purpose Heavy Duty Bench Vice With Multifunctional Soft Jaws, 270° Swivel Base Home Vise for Woodworking,Home Workshop,Welding and DIY
- 【Data 】Vise weight 17.4 lb, the maximum of jaw 3.6 inch, Jaw width: 6 inch, the maximum of clamp workbench 2.3 inch.
- 【 2 IN 1 】 The Bench Vise can be directly fixed to a table or workbench with the accompanying screws, or can be directly clamped to the workbench with the accompanying base, making it more flexible to use.
- 【High Quality】The Heavy Duty Bench Vice is made of high-strength forged steel, which is sturdy, durable, and not easily damaged. The surface coating can effectively prevent rusting.
- 【Widely Used】Table Vice can rotated 270°, and do not need to be punched to install on the edge of a 2.3-inch thick table. It is an ideal choice for some industries, such as Woodworking,craftsmen, model making , Electronic products,Welding and others.
- 【Service】If you are not satisfied with the products, you can contact us at any time ，we will give you a satisfactory solution， If the product malfunctions during normal use, it will be replaced unconditionally within 3 years.
$76.97
Last update on 2025-05-03 / Affiliate links / Images from Amazon Product Advertising API